Flueless Gas Heater – User Manual
Message from the CEO
Dear Customer,
In developing this product, we pursued two goals: delivering the best quality gas heater on the market and producing the most cost-efficient gas heater. We believe we have achieved both goals, but if you have any comments, we would be glad to hear from you. Thank you for purchasing from our range. We wish you many pleasant and warm hours.
Sincerely,
CEO
Warranty
The Provence gas heater is manufactured by Universal Innovations and complies with strict quality standards. The product is covered by the following warranty:
THIS PRODUCT HAS A FULL TWO-YEAR WARRANTY WHEN USED PROPERLY. This warranty does not affect your statutory rights.
For assistance, contact our customer service in Dublin, Ireland at 00 353 1 2873797 or visit www.saharabbqs.com. If you require help, please contact us directly at the factory. Do not return the goods to the place of purchase.
USER INSTRUCTIONS
Important information before using this appliance:
Read the user manual before using this appliance.
When lighting the appliance for the first time, allow it to burn on high for at least 4 hours in a well-ventilated room to cure the synthetic logs (the logs will emit an odor during curing). The flame color will appear yellow at first ignition.
The appliance must be installed and used in accordance with current regulations. Place the heater on a flat surface and use only in a well-ventilated room. Minimum room size: 64 m³ with a minimum ventilation of 80 cm².
Regulator Assembly:
Attach the regulator to the end of the hose and secure with a hose clamp. To ease installation, lubricate the regulator’s ribbed nozzle with soapy water.
Gas Cylinder Installation:
- Ensure the area is free from unprotected flammable materials or liquids.
- Replace the gas cylinder according to the instructions. Replacement and connection must be carried out in a flame-free area.
- Attach the regulator to the new gas cylinder, ensuring the hose is not twisted or damaged.
- Use a gas cylinder with a maximum capacity of 15 kg.
- To remove the regulator, ensure it is in the “off” position.
Before ignition:
Inspect the hose assembly. Replace if cut, worn or leaking. Ensure the heating element is placed at least 0.6 m vertically and horizontally from combustible materials. Make sure the heater door is properly closed.
Lighting the heater:
- Insert the supplied AAA battery into the ignition button (“+” side up). Remove the battery when not in use.
- Turn on gas supply at the regulator.
- Push down the control knob, turn to the 2nd position, and simultaneously press the ignition button to light the pilot flame while holding the control knob.
- If no spark, check battery placement. The pilot flame is visible on the right side of the log bed.
- If the pilot does not ignite, turn to 1st position, wait 1 minute, and repeat step 3. Do not hold the knob continuously.
- Once the pilot lights, hold knob at least 10 seconds until main burner ignites. Adjust flame between 3rd (high) and 2nd (low).
- If flame does not remain lit, return knob to ignition position and repeat steps.
- The 1st position is for pilot flame only.
Turning off the heater:
- Turn knob to 1st position.
- Turn off at gas regulator after use (pilot remains lit until regulator is closed).
- Disconnect regulator from cylinder when not in use.
- Remove battery for long storage.
Warning: The glass door prevents fire hazards and burns but does not offer full protection for children or disabled persons. For full protection, use a BS 8423 fireguard.
ASSEMBLY INSTRUCTIONS – IN 3 EASY STEPS
Test all gas connections for leaks using leak detection fluid or soapy water applied with a brush.
Insert the back panel of the heater by placing the tabs at the bottom of the door inside the frame, then push flush and lock with the door latch.
Place synthetic logs on the grate as shown, close the door and lock with the thumbscrew.
Insert the AAA battery in the ignition button (“+” side up).
An odor upon first use is normal. Burn the stove on the highest setting for 4 hours in a well-ventilated area to harden the synthetic logs.
Technical and Maintenance Information
Indoor use only with Butane, Propane, or LPG at 28–30 mbar supply pressure. Must be serviced by a qualified registered gas technician.
Technical Specifications:
- Height: 775 mm
- Width: 460 mm
- Heat input: 3.4 kW (gross)
- Gas consumption: 245 g/h (max)
- Gas category: I3B/P (30)
- Injector size: 0.9 mm
- Cylinder size: max. 15 kg
- Hose: 40 cm (EN 16436-1 compliant)
- Country of use: Belgium
Warranty: 2 years full warranty under correct use.
Manufacturer contact:
Universal Innovations Ltd., Kilcoole Industrial Estate, Kilcoole, Co. Wicklow, Ireland.
Helpline: 00 353 1 2873797 (Mon–Fri, 9 am–5 pm)
Website: www.saharabbqs.com
Safety Instructions
VEILIGHEIDSINSTRUCTIES
Nooit: gebruik de kachel in hoogbouwflats, kelders, badkamers of slaapkamers.
Nooit: gebruik ander gas dan Butaan, Propaan of LPG.
Nooit: maak de kachel schoon voordat deze is uitgeschakeld en volledig afgekoeld.
Nooit: gebruik een open vlam om vermoedelijke gaslekken op te sporen.
Nooit: laat kinderen of huisdieren in de buurt van de kachel spelen.
Nooit: draai de flexibele gasslang verder.
Nooit: raak het glazen paneel of de voor- en zijkanten van het apparaat aan terwijl het verwarmingselement in werking is. Laat het apparaat een uur afkoelen voordat u de voorkant of zijkanten aanraakt.
Nooit: gebruik in recreatievoertuigen zoals caravans en campers.
Nooit: plaats het apparaat in de buurt van muren, meubels, behang, gordijnen, beddengoed en andere ontvlambare materialen, omdat dit brandgevaar oplevert.
In geval van een gaslek, d.w.z. als u gas ruikt, draait u de kraan van de gasfles dicht. Koppel de gasfles los, neem deze mee naar buiten en neem contact op met een bevoegde servicetechnicus.
Waarschuwing:
Probeer het apparaat nooit aan te steken als de slang los zit of op een of andere manier beschadigd is. Probeer het apparaat ook nooit aan te steken als u redenen hebt om aan te nemen dat het toestel gas lekt. In geval van een gaslek dient u de gastoevoer naar de gasfles af te sluiten en laat het apparaat volledig controleren door een bevoegd persoon volgens de bijgevoegde instructies. We adviseren om aan het begin van elk stookseizoen een onderhoudsbeurt uit te voeren.
Als u de gasfles moet vervangen, controleer dan of de gastoevoer naar de gasfles is afgesloten en dat er geen ontstekingsbronnen in de buurt zijn voordat u verder gaat.
Never: use in high-rise flats, basements, bathrooms, bedrooms, caravans, or campers.
Never: use other gases than Butane/Propane/LPG.
Never: clean while hot.
Never: use open flame for leak detection.
Never: allow children or pets near the heater.
Never: twist the flexible gas hose.
Never: touch glass or panels during operation.
Never: place near walls, curtains, bedding, or flammable materials.
In case of gas leak: shut off valve, disconnect, move cylinder outside, call technician.
Always: place heater on a flat, stable surface, store cylinders outdoors, close gas supply after use, service annually, follow gas bottle safety instructions.
Cleaning: only with damp cloth when cooled.
Gas bottles: designed for Butane/Propane/LPG cylinders up to 11 kg.