LPG Techniek Van Meenen bvba
Manufacturer - Distributor - Research Centre - Converters of LPG and CNG systems.

LPG - CNG for Cars - Campers - Fork lift Trucks - Generators - Boats - Karts - Scooters
Distributor for: Bigas, GFI Control Systems, IMPCO, LIMA, GZWM

français Deutsch Nederlands

Dealer Area

Manuals > How to install the thermoplastic hose for LPG

LPG thermoplastic hose

INSTRUCTION TO ASSEMBLE FLEXIBLE HOSE
- Cut the hose edge in a perpendicular way. Verify that there is no residual of protective covering. Position the nut and the bicone
-  Block the connection in a vise. Position the hose on the connection edge. Push strongly the hose against the shoulder of the connection
-tective covering. Position the nut and the bicone
- Push the bicone against the shoulder of the connection
- Screw the nut on the connection against the shoulder of the connection

GENERAL INDICATION
- Tightening torque for the connections with a 18 mm wrench must be between 28 and 30 Nm
- Tightening torque for the connections with a 16 mm wrench must be between 23 and 25 Nm
- The minimun bending ray for the hoses with an external diameter of 12,2 mm is of 35 mm
- The minimun bending ray for the hoses with an external diameter of 9,6 mm is of 25 mm
- Do not place the hoses next to heat sources which are at more than 125°C
- We suggest to fasten the hoses with clamps every 50 cm
- Please test the installation after assembling

Homologation: E13-67R-010299
Homologation documents are available on request.

Pricelist: download

 

 

 


LPG Techniek Van Meenen bvba - Peperstraat 1 - 9900 Eeklo - Belgium
Tel +32(0)9 378 68 23 or +32(0)9 373 63 72 - Fax +32(0)9 296 08 25 - vanmeenen@vanmeenen.com

 

LPG Techniek Van Meenen bvba - Copyright © 2008 - Alle rechten voorbehouden. LPG Techniek Van Meenen bvba kan op geen enkele manier verantwoordelijk worden gesteld voor onjuistheden in deze website. Het is desondanks wel de bedoeling om deze website zo accuraat mogelijk te houden. Indien u opmerkingen heeft, aarzel niet en stuur een mailtje naar de webmaster Ives Van Meenen: ives@vanmeenen.com.